Inactivity follow-up sequences (AI vs fixed mode)
Set up a sequence of automatic reminders when a customer stops replying, choosing AI-generated or fixed text per touch.
Watch this step in the video · Customer inactivity
What they are and when to use them
When a customer goes quiet mid-conversation, your AI agent can send one or more automatic reminders before giving up. We call this a follow-up sequence: an ordered list of "touches", where each touch fires after the customer has been silent for a set amount of time.
Every touch runs in one of two modes: AI (the agent writes a context-aware message based on the conversation) or a fixed message (always the same text). That lets you balance natural tone against predictable wording.
Requirement: the sequence only runs while the AI agent is active on the conversation. Once the chat is handed off to a human, the touches stop.
How to set it up
- Open AI Agents in the side menu and select the agent you want to edit.
- Go to the Behavior tab and scroll to the Customer inactivity section.
- Turn on Enable automatic follow-up. The first touch appears.
- On Touch 1, set how many minutes of silence must pass since the customer's last reply.
- Pick the touch mode:
- Generate with AI (context-aware): best for sounding natural and picking up where the chat left off.
- Use a fixed message: type the exact text to send (handy for promos or legal notices).
- Click + Add touch to add more reminders. Each touch must use more minutes than the previous one (e.g. 5, 30 and 120 min).
- To hand the chat to a person when the customer still doesn't answer, enable Transfer to a human if still no reply, set the minutes, the destination team and an optional message. The handoff must happen after the last touch.
- Save the agent.
How to verify it works
- Times are always counted from the customer's last reply, not from when they opened the chat.
- Use the sandbox tester to preview the tone of AI-mode touches before going live.
- After saving, open a test conversation, stop replying, and confirm the first touch arrives at the configured minute.
The agent's schedule and "never hand off"
- It follows the agent's schedule. If the agent has working hours, outside them no reminders are sent and nothing is transferred: it waits until the agent is back on and the sequence continues where it was. When it reopens it keeps the spacing between touches (several do not go out at once) and the transfer also waits its time after the last touch.
- It does not start after 24 hours. If the customer has been silent for more than 24 hours (also when coming back from outside working hours), the sequence is not sent.
- With "AI always handles it (never hand off)" on, inactivity only sends the reminders and never transfers to a person. The "Transfer to a human if still no reply" part is hidden (your settings are not deleted) and the reminder the AI writes does not offer or promise that a person will take over.
In Behavior → Customer inactivity you will see a notice when each case applies.
Example: working hours Monday to Friday from 9:00 to 18:00 and touches at 30 and 90 minutes. If the customer stops replying on a Tuesday at 17:50, the first touch goes out on Wednesday at 9:00 and the second one at least an hour later.
If it doesn't work
- No touch arrives: make sure the agent is still active on the conversation (an earlier handoff disables the sequence) and that the minutes aren't set too high.
- The second touch is rejected on save: minutes must be strictly increasing. Fix the touch highlighted in red.
- The handoff never fires: its minutes must be greater than the last touch's; and there is no inactivity handoff if "AI always handles it (never hand off)" is on.
- The touch did not go out on time: if the agent was outside its working hours, the touch waits until it is back on.
- The fixed message is empty: in fixed mode the text is required for the touch to be sent.
Tip: pair 2-3 short AI-mode touches with a human handoff at the end. You recover lukewarm chats without spamming the customer.
Tip: for campaigns with legal conditions, use at least one fixed-mode touch so the wording goes out verbatim.
Related articles
Related articles
-
Create your first AI agent
Learn what an AI agent does in Omnifox, how to give it instructions, connect it to a channel and test it in the sandbox before it talks to real customers.
-
How to write good instructions for your AI agent
Learn how to write clear instructions so your AI agent replies with the right tone, limits and actions.
-
AI Agents complete guide
AI Agents in depth, in 65 chapters: creating, instructions, tools, knowledge, behavior, tester, inbox, workflows, analytics and usage, with every setting explained.
-
Connect your AI agent to WhatsApp, Instagram, Messenger and web chat
An agent with no channels serves nobody. Connect it to your WhatsApp, Instagram, Messenger or website chat from the Connections section, then switch it on so it starts replying.
-
Start here: AI Agents in 8 minutes
AI Agents essentials in a short video: creating an agent, its instructions, tools, knowledge, channels, the tester, hours and handing over to a person.