Live Supervisor: SIP telephony, active calls and agents on call

Monitor live telephony: per-agent SIP registration, the active calls panel and On call states (Talking, Ringing, Dialing, On hold).

Jun 26, 2026

Watch this step in the video · Calls in the supervisor

What it is and when to use it

The Live Supervisor dashboard (Reports → Live Supervisor, /reports/live) also surfaces telephony in real time: which agents have their browser registered with the phone system (PBX), who is talking right now and to whom. You see it in two places: the Active calls panel and the Telephony and On call columns of the Workload by agent table.

Everything refreshes every 30 seconds along with the rest of the board.

Requirements

  • A plan with the Live Dashboard feature and the View reports permission (reports.view).
  • For an agent to show as registered they need an active calls/voice channel and their browser connected to the PBX.

The Telephony column (SIP registration)

It tells you whether the agent's browser is hooked to the PBX to receive calls:

  • Registered (green) — browser connected to the PBX, ready to receive.
  • No channel (amber) — the agent is online in the inbox but their browser failed to register with the PBX. It's actionable: ask them to reload with Ctrl+Shift+R.
  • Offline (gray) — no active presence.

Note: inbox presence and SIP registration are independent. An agent can be Online and at the same time No channel if their in-browser softphone didn't connect.

The On call column

Shows each agent's phone state in their row:

  • Talking (red, pulsing) — call connected, with an mm:ss timer.
  • Ringing (amber) — inbound, not yet answered.
  • Dialing (sky blue) — outbound in progress.
  • On hold (violet) — call parked on hold.
  • Free (gray) — no call.

The Active calls panel

Above the table, it lists one row per ongoing call across the visible workspaces. The red dot in the header pulses when there are calls. Each row shows:

  • The direction: ↘ inbound, ↗ outbound.
  • The other party (customer name or number).
  • Which agent they're talking to and over which channel.
  • A live duration timer and the state (Connected, Ringing, Dialing, On hold).

If there are no calls, you'll see "No calls at the moment."

Verification

Ask a registered agent to make or take a test call: they should appear in Active calls and their row should switch to Talking with the timer running.

If it isn't working

  • An agent shows "No channel": their browser didn't register with the PBX. Have them reload with Ctrl+Shift+R; if it persists, check that the voice channel is active and that they have calling permission.
  • No active call appears: there may genuinely be none, or the live connection is down — reload the board.
  • State is slow to change: there's a small delay (seconds) because call state refreshes via heartbeat.

Tips

  • Use Telephony as a start-of-shift checklist: every phone agent should be Registered before the queue opens.
  • The Active calls timer helps you spot abnormally long calls so you can step in and support the agent.

Related articles

Was this helpful?

Related articles

Message us on WhatsApp